Huawei G610-U20 hang on logo solution

Huawei G610-U20 hang on logo solution

Huawei G610 has one solution for various faults. like hang on startup logo, Restarting on startup, the android system has stopped, the gallery has stopped, etc, so the solution is firmware flashing.

Firmware upgrades have three methods for this phone.

  • Upgrade Huawei g610-U20 with USB cable via sp flash tool
  • Upgrade Huawei g610-U20 with sd card method.
  • Upgrade Huawei g610-U20 with a zip file using recovery.

USB Upgrading method for Huawei g610-U20

Download firmware Huawei G610-U20  then extract zip using zip7, WinRAR, win zip, etc. then open extracted folder you get tools and drivers folder inside the firmware folder. extract sp flash tool zip then opens it then select Scatter file located in USB upgrade folder. phone battery must be fully charged or more than 30% after selecting the scatter file press the download button and connect the phone to the USB sp flash tool will start flashing your phone now. don’t touch or remove the USB cable until you see done.

That’s it you have successfully flashed Huawei g610 using USB cable. if you get any error during this or failed to flash the phone with the USB method you should try the SD Card method. I have also posted sd card method in this blog use search to find it.

Huawei G610-U20 Upgrading SD Card method

The Sd Card method is the safest method for this phone but most of the time we get failed due to the battery low. your phone battery must be fully charged as recommended. visit the link below for detail of sd card method.

SD Card method 

* Note: This may harm your phone so use this at your own risk.

Leave a Comment