Category: LG

How to Root LG v10 H901 Android 7.0 Nougat

In this post i am going to write about How to Root LG v10 H901 Android 7.0 Nougat, But before start root process for LG v10 you must have bootloader unlocked on your LG v10. So if you are confused or don’t know how to unlock bootloader on LG phones you should first reed How to unlock Bootloader on LG v10 artical. If you deviate from this procedure, and think: “I can just skip a step, or I can do this on my own Linux install”. Don’t complain if you brick your phone.


  • You need to download FWUL (version 2.7 or later) and burn it to a USB stick: link
    Even if you have Linux, and you think you can install the dependencies, don’t. I know this works from FWUL.


  • Boot from your FWUL USB stick. If your PC has secureboot enabled, you will have to disable it in BIOS
  • Put your phone into download mode. By turning it off, hold vol up and plug in the USB cable. You do not need to touch the power button — the phone will power on and enter download mode.
  • Once booted successfully to FWUL, Login to FWUL. The password is: linux
  • Double click the LG folder can be found on the desktop
  • Double click on LG LAF (runningnak3d) icon and you will be at a terminal prompt.
    Execute the following commands in terminal one by one. You can copy / paste them if you like.
git pull
git checkout v10-miscwrte

When you are told to, pull the USB cable, and the phone will power off. You have TWRP installed now. At this point you can flash a ROM, or Magisk or whatever you like using TWRP.

If you don’t know what to do with TWRP, and you just want to run rooted stock, this is for you….
First boot into TWRP – with the phone off, hold vol down and power at the same time. The second the LG logo appears, release power for a split second, then then press and hold power again (you never let go of vol down).
When you get a screen asking you to factory reset, you can let go of both buttons. hit vol down to select yes — two times — this will take you to TWRP.

PROCEDURE PART 2: Rooting and cleanup

Now when you are in TWRP enter command below via terminal:


If you ran you have TWRP on recovery, and you are rooted. If you only ran, then you have TWRP on recovery. Either way, enjoy! Subscribe via Email and Social Media for more.

CREDITS: runningnak3d originally posted at XDA

Tags: , , , , , , ,

How to unlock Bootloader on LG v10

In this tutorial i am going to share Bootloader unlock method for LG, If you are looking for bootloader unlock on LG you should follow this tutorial to learn about it.

Warning! You loose phone Warranty after root / bootloader unlock.

What is Unlock Bootloader ?

A Bootloader is a code which runs when we turn on our device. This code initializes some hardware and then loads the kernel and ramdisk, and gets the boot process going. So this process is known as Bootloader. The same concept applies to all the technology stuff such as Laptop, PC, Smartphones and any such device. Every Android OEM manufacturers lock the bootloader even though it is an Open Source. So if you want to try custom ROM on your device, it is not possible to load the custom ROM without Unlocking Bootloader. So Manufacturer made a policy of making the smartphone with Unlocked Bootloader will void the warranty. They want you to stick with the Stock ROM. Unlock Bootloader allows you to Root your android smartphone, Flash TWRP and Custom ROM.


  1. You will Loose phone warranty if you unlock bootloader
  2. Charge your phone battery up to 80%
  3. Unlock Bootloader may wipe all your data, So make sure to Backup your Smartphone on SD Card or in your Computer.
  4. Follow the steps properly. Don’t Skip and Read ! – We are not responsible for any damage that you make to your phone.

What Do You need ?

  • Download Minimal ADB package from this page.


  1. Enable Developer Option to Enable Developer Options, Go to your Settings -> About Phone -> Now Tap on Build Number 7 Times until you see a message “Developer option enabled
  2. Now you need to enable the OEM Unlock by going to Settings -> Developer Option and Enable OEM Unlock
  3. Extract Minimal ADB package on your computer
  4. Turn your phone off and Boot your phone into Bootloader by pressing Volume Up + Power Button Simultaneously until you see a fastboot/bootloader
  5. Go to the folder where you have extracted the ADB Minimal Package
  6. Plug the phone into your PC, then open a command prompt window by pressing Shift Key + Right Mouse Click on empty area of Minimal ADB folder.Unlock Bootloader on LG v10 H901
  7. Now type the command in your command window
    fastboot devices
  8. This command will list the connected devices. If your phone’s serial number shows up you are good to go and may continue. If the phone is NOT listed this indicates that your drivers are not installed correctly. In order for you to continue you must fix your drivers so that your phone is listed under fastboot devices.
  9. If you are on Windows 10 then you might get error  ” command not recognized ” as screenshot below. Then you first need to type cmd and hit enter to enter in to CMD.adb command error on windows 10
  10. If your phone has been recognized by the command above, proceed to unlock bootloader with the following command: Remember that this step will wipe EVERYTHING off your phone
    fastboot oem unlock
  11. You have unlocked Bootloader on LG V10
  12. Now you can reboot your phone by entering the command
    fastboot reboot-bootloader
  13. Click Enter and That’s it !


Tags: , , , ,

LG G5 Restarting After LG Logo Fix

If your Smartphone failed to boot normally and stuck or restarting on boot logo, This failure called boot loop. In this post i will try to show some steps to clear boot loop problem in your LG smartphone or any other brand. To fix boot loop problem in your LG smartphone you need to follow these steps. I suggest you to read whole post before starting. Please keep in mind do all at your own risk, i ma not responsible for and damage.

1. Loose Battery connection
2. Software Customization
3. Faulty Battery ?
4. Poor Hardware

1- Loose Battery connection:

If your cellphone is being restarted at startup logo or shutting down automatically in your pocket you should first check battery connectors both cellphone’s and battery side.

Because of dust or due to touching battery ? on tongue ? by mistake. Some people thinks that they can test battery current by touching it on their tongue ?. But they don’t know they are actually destroying battery and terminals. So it should be a first reason of boot loop problem.

Clean terminals on both battery and cellphone side.

2- Software Customization:

If have done any customization in you cellphone software like root, custom recovery, custom rom and your cellphone is now stuck on startup logo or being restarted after logo, This called boot loop due to software customization.

This problem can only be recovered via loading correct software (Official firmware), please never ever try to play with you cellphone board. There is no hardware fix if you have bricked your phone due to root, flashing custom recovery or custom rom. Just flash official firmware for this type of problem. visit How To Flash/Upgrade LG Android Phones With LG Flash Tool to know more about official firmware flashing method and How To Download LG Firmware By IMEI?

3- Faulty Battery:

In my experience as a cellphone technician, I have seen and fixed lots of smartphones with restarting  problem at boot logo by replacing or modify cellphone battery.

Why Mostly Smartphones Restarting on Faulty Battery?
Almost all smartphone batteries comes with self protection circuit. Some manufacturers using a resistor in series at GND line to protect battery from short circuit, over load etc. some times this resistor loose it’s resistance due to over heating. Then this resistor will not pass enough current to the phone, and phone starts rebooting on startup logo.

How to Restart Fault is due to battery?
In my experience we noticed that mostly phone stop rebooting while connected to charger. So if your cellphone is working fine during connected charger, and start rebooting immediately or in few seconds when charger being disconnected. It must be due to faulty battery or loose battery connections.

Change your cellphone battery and you’ve done! If can’t change battery with new one then you can fix this problem by shorting big resistor used in series at GND line. Watch this video to understand.

4- Poor Hardware:

This is true that mostly LG phone users facing boot loop problem due poor hardware parts and logic board assembly by manufacturer. Boot loop problem is become famous from LG G3 series phones and later models.


Follow the video to fix boot loop on your LG G5 or any other smartphone, But be very careful if your phone locked using black glue under CPU.

Thanks for reading Leave your message in comments if you have any problem regarding this. Please don’t miss to like this video and our Page, Follow us on Facebook, Twitter, YouTube, Google Plus.

Tags: , , , , ,

Data Recovery From Dead or Bricked Android Cellphone

Data recovery from Android bricked or dead cellphones. yes we can recover user data from dead or no none working Android devices. Sometimes when Android phones show us QHSUSB_BULK device manager when we connect the cellphone to PC. Sometimes Windows prompts us to format the disks at connecting to PC via USB cable.

When your Cellphone suddenly gone dead or gone bricked during experiments, And you have very important data in cellphone. When you connect Cellphone to PC and Windows shows you so many drives or Windows prompts you to format the disks. Don’t worry i am going to share data recovery method from dead android cellphones that show only QHSUSB_BULK in device manager and showing so many drives and asking to format drives.


1. Windows defines the device as QHSUSB_BULK 
2. Windows prompts you to format the disks (pc.10)

What You Need:

  1. A Android Cellphone with important data, That you have not backup copy!
  2. You Android cellphone battery must be fully charged.
  3. A Original USB cable

Data Recovery Process From Dead Cellphone:

1. Download the Ext2fsd – the latest version can be download sourceforge
2. Install Ext2fsd and reboot your Computer
3. Start Ext2fsd 
4. Find the disk corresponding to the memory capacity of our unit (16GB / 32GB) 
5. Then press the right mouse button the selected drive (PTP) And select ext2 Managment 
6. In the opened menu we put the following checkboxes:

  • Mount volume in readonly mode
  • Autonatically mount via Ext2Mgr (on the contrary, choose the drive letter)

7. Click Apply 
8. Open My Computer and browse the contents of the mounted disk and search for the  files which you want backup
9. Make a backup copy of the required files on your computer’s hard drive.
10. Happy End! [Follow me via Google Plus]

If your cellphone unable to show drives or you have any other problem, and you wana retrieve you important data from your cellphone. We can recover user data from bricked, fully dead phone, broken cellphone that unable to power on. You can contact us any time. We can recovery data via 4 different ways, We can read data from eMMC chip only.

Tags: , , , , , ,

LG G4 Bootloop Fix

In this video i have described all information about LG bootloop, I have fixed so many LG phones with bootloop problem. So i have made this video for people who facing bootloop problem in LG phones specially in LG G4. This video is about poor LG batteries quality. Lg and some other Smartphones have poor battery circuits in side battery and that is the reason of mostly phone restart after showing LG logo. I have seen 55% LG bootloop problem comes from battery.

How to conform that bootloop problem is due to battery?

If you noticed that LG phone restarting after showing LG logo and working good when charger is connected. mean when we connect charger to phone and then power on phone booting normally. and when we disconnect charger phone start restarting again.

Why bootloop comes in mostly LG Mobile phones?

Because of poor quality batteries and hardware. but in this video i have described about bootloop fix via battery. In LG Smartphone batteries manufacture used and 0 ohm resistor for protection and overload. in most cases this resister gone weak and increased it’s resistance. and when this resistor increase it’s resistance then battery can provide full current to phone phone. and phone start bootloop when battery not provide enough power to phone. that is the reason of bootloop due to low battery current.

Follow on Google+ for more useful information about Smartphones.

How to Unlock LG Risio 2 With Z3X


In this post i am going to shared unlock method of LG Risio 2 using z3x box, So you can continue if you have z3x box with lg activation. If you have not z3x with lg activation you can learn from this post also. you can use any LG service device, This connection method of lg android phone with pc is same for every device.

How to Unlock LG M154 (LG Risio 2)

1. Go to to the phone dialer and enter #546368#154#
2. Click on SVC Menu
3. Click on Port Check Test and enable
4. Go back to LG Tool and click on Manual Choice of Models in the options section
5. Select the LG USB port in the port drop down
6. Select Search phone and you should get phone information. Make a note of your imei number
7. Click Unlock
8. After process completes, your IMEI will probably be 0
9. If this is the case, run 0 IMEI Fix in Repair section
10. Reboot phone and you should be unlocked

Visit source post if you want to see unlock log


Good Luck!

Keep visiting pakfones for exclusive solutions.

LG Optimus L7 P705 Software Upgrade

Installing Official Firmware on LG Optimus L7 P705

LG Optimus L7 P705 Software upgrade guide. I this video i have shown full information about how to upgrade or flash lg LG Optimus L7 with official kdz firmware. You can also flash other lg android phones by this method. Sp please see full video.

LG Flash Tool And Firmware




Note: We are not responsible for any damage. Do it at your own risk.

Tags: , , ,

How to Extract TOT File Complete Video Guide


If you have bricked LG mobile phone using wrong firmware or bricked your LG phone during converting it to other model you can unbrick LG easily specially LG G2, LG G3, LG G4. I this tutorial I will show you how to extract LG .tot, .kdz firmware. These files will be usable for LG Boot loader restore.

Why we need to extract LG firmware:

The extracted firmware files are helpful in unbrick lg soft bricked and hard bricked devices. These files can be used with BoardDiag utility. These files also are suitable for restore internal partition via direct emmc and jtag devices like easy jtag, riff jtag etc. But in this tutorial i will show you How to Extract TOT File Complete Video Guide and will use it in next post and video about how to unbrick lg hard bricked devices.

How to extract lg .tot firmware?


How to Extract TOT File Complete Video Guide:



After Extraction TUT File You Will See  Files Like This

Now you need visit How To Unbrick Hard Bricked LG G3 All Variants for detailed guide and next video.


Tags: , , , ,

How To Unbrick Hard Bricked LG G3 All Variants

In this post i am going to share how to unbrick hard bricked LG G3 all variants. I have made some changes from original guide for better understand. you can repair you lg g3 any variant with this guide. After Read This Tutorial You Will Able To Fix These Situations in LG G3 mobile phones.

LG G3 Hard Bricked Conditions

  • LG G3 device that are unable to boot or dead boot fix,
  • LG G3 Only Shows Qualcomm HS-USB QDLoader 9008,
  • LG G3 won’t power on fix, LG G3 no recovery fix,
  • LG G3 no download mode fix,
  • LG G3 Shows LGE AndroidNet USB port fix,
  • LG G3 LGE AndroidNet USB Modem,

LG G3 Hard Bricked Conditions with pictures.

So let’s start How To Unbrick Hard Bricked LG G3 All Variants Guide. If you have phone with these conditions LG G3 only shows Qualcomm HS-USB QDLoader 9008, LG G3 LGE AndroidNet USB Modem, or any witch is listed above.


LG G3 Hard Bricked Solution:

If You Are On Situation “LGE AndroidNet USB port” You To Need To Change “LGE AndroidNet USB port” To “Qualcomm 9008”

1- open the phone

2- On Mother Board Remove The Cover Of “eMMC”

3- Short test point with ground without the battery and Connect USB Cable Test points may be different in different boards so please search test point for you model or post in comments i will try to find for you.


After This Your Phone Shows “Unknown Device” In Device Manager So Install Qualcomn Driver.

And Connect With PC With Out Battary

Now Fixing “Qualcomm HS-USB QDLoader 9008”

LG G3 Unbrick Requirements:

How To Unbrick LG G3 Hard bricked Phone?

1-Install Qualcomn Drivers.
2-Extract Rar Of BoardDiag v2.99a And Run It.
3-Extract Zip Of ToT firmware file for your phone.
4-Make sure you have extracted Correct ToT File.
5-Put ToT file in BIN.
6-Set Directory (where ToT File Will Extract) DIR.
7-Click On Extract Button.


How to Extract LG Firmware Full Detail And Video Guide.

After Extraction TUT File You Will See  Files Like This



1)Choose “Chipset” For G3 Choose B2
2)Select Correct COM Port Which Shows in Device Manager i.e, (COM8)
3)Select Source Of file Where ToT file Extracted
4)Tick Into “AP Test” And “EMMC TEST”
5)Click On Start

After Both Test Passed

Choose Restore Option And
Restore These Files One by One In this sequence
Note: Don’t Change the Sequence


After Complete Disconnect Phone And Insert Battery
If Your Phone Boot Up You Have Success
Then Boot Into Download Mode And Flash ToT File With LG Flash Tool.

IF Get Success Then Press Like Button And Please Leave Comments If You Face Any Problem.

Source And Special Thanks To @Will C r a c k e r Form XDA Developers For Pictures Guide.

How to Restore Boot loader On LG G3 after bricked Full Videos Guide?


Tags: , , , , , , , , , , , , , , ,