Category: Oppo

Oppo A37 Charging Flex Connector Repair Done!

In this post i am going to share full story of Oppo A37 charging flex connector repair. I this case we received Oppo A37 with MIC fault, Oppo A37 lower microphone was not working. but mic suddenly start working when we open two screws battery connector was tighten with these.

We shocked when we disassemble Oppo A37 board from display frame, because the other side female connector exactly below the battery connector was damaged badly. That was now easily available in market.

How and where we got broken connector?

I first tried search from old board, because i remembered that we have a Oppo A37 dead board in our dead board collection. so started search about it but shocked again when i see this also have lower pcb flex connector damaged.

Then we started search for Oppo A37 charging flex connector (female connector placed opposite side of battery connector) from damaged LCD’s and finally Samsung J5 LCD connector matched with Oppo A37 charging flex’s female connector on placed board.

Conclusion:

So we removed connector from damaged Samsung J5 display by heating it from below side. Then we used 30 watt soldering iron and soldered connector to Oppo board, that we collected from broke Samsung j5 display. That works perfectly on Oppo A37. You can watch picture gallery below.

This was just an idea how to repair broken lcd connectors by using then from old / dead boards or from broken display. We hope you have got an idea from this post. subscribe via email or follow us on YouTube, Google plus or on other social media to satay connected with us.

Tags: , , , , ,

Oppo RX17 Pro – Phone Specifications

Oppo RX17 Pro also known as the Oppo R17 in China with the same hardware. A feature rich device with a sleek design, capable hardware and camera on the back. However, there are quite a few things that raise the coolness factor of the handset and in display finger print is one of them. Also it’s no secret that this phone is close relative to the OnePlus 6T but the RX17 Pro has a few unique features of its its own too a clear case of sibling rivalry.
Don’t expect any awe-inspiring sliding mechanism in Find X-esque fashion or Snapdragon 845-like performance but the 3D TOF sensor on the back of the phone has some potential that we hope Oppo will unlock with future updates because for now, the functionality is rather limited. On the other hand, the usable under-display fingerprint reader and the stupid fast SuperVOOC charging make for a less gimmicky user experience.

Specifications

Technology: GSM / HSPA / LTE

Battery: Non removable Li-Po 3700 mAh

Body: 157.6 x 74.6 x 7.9 mm, 183g, glass front and back panel with an aluminum side frame.

Screen: 6.4″ AMOLED 1080 x 2340px resolution.

Chipset: Snapdragon 710 (10nn) chipset: octa core CPU (2x Kryo 360 gold @2.2GHz + 6x Kryo 36 silver @ 1.7GHz) Andreno 616 GPU.

Memory: 8GB RAM, 128GB built-in storage, microSD slot support.

OS: Android 8.1 Oreo, ColorOS 5.2.

Rear camera: 12MP f/1.5-2.4, 26mm (wide) 1/2.55″, 1.4µm dual pixel PDAF, OIS + 20MP f/2.6, AF, LED flash; [email protected]/120fps, [email protected]fps, [email protected] video recording with stereo sound.

Front camera: 25MP, f/2.0, 1/2.8″, 0.9µm, [email protected] video recording.

Connectivity: Dual-SIM; LTE-A, Cat.15/13 (800Mbps/150Mbps); USB-C; Wi-Fi a/b/g/n/ac; GPS; Bluetooth 5.0, USB 3.1 Type-C.

Misc: Under display fingerprint reader, 3D TOF camera on the back.

Disclaimer. We can not guarantee that the information on this page is 100 % correct.


Tags: ,

How To Recover Pictures And Videos From Broken or Dead Smart Phone

This video will help you to recover pictures and videos from a none working or dead mobile phone. In this video I have used I have used direct emmc method. we do all this work wothout removing emmc chip from board but we must have direct emmc pinouts to do it. In this video i recovered data from QMobile Z8.

How To Recover Pictures And Videos From Broken or Dead Smart Phone

Thing that needed to this work.
1=ATF BOX jtag activated.
2=Good soldering skills.
3=Broken phone direct emmc pinouts or emmc chip pinouts.
4=A fresh and hardworking mind.
5=Free time because this method is 10 time slower then normal data copy from emmc.

How to do it?
1=Solder direct emmc pinout connections (use direct box or emmc adapter)
2=Scan emmc after opening atf box exe.
3=Select mount chip and wait to get new drive in windows. (In my case i used win 10 and i installed linux drivers to mount emmc chip)

For all other information please follow this video and pause video if you not understand any stage.

Please subscribe this channel from useful videos from us.

For more visit us.
http://www.facebook.com/pakfones
http://www.pakfones.com
http://www.youtube.com/pakfones

 

Paid service to recover Data from not working mobile phones

Tags: , , , , , , , , , , , , ,