How To Upgrade Samsung i545 To Lollipop Official

How To Upgrade Samsung i545 To Lollipop Official in this post i will try to give you all information that can help you to upgrade any samsung mobile using this method. Because all Samsung latest smart phones can be upgrade via same method. Because this method is an official method to upgrade Samsung Android mobile phone via Odin. You may already know about odin if you don’t know or want increase your knowledge about Samsung Odin. Then you should read this post What Is Odin And How To Use Complete Guide

How to upgrade Samsung Galaxy S4 To Lollipop?

  • Download Samsung latest drivers and install on your PC if you have not already installed.
  • Download Samsung Firmware and extract Using 7zip, or any other unzip utility program.
  • Download Odin v3 or any new version and unzip it.
  • Restart your Phone in Download Mode (by pressing Home + Power + Volume Down buttons together).
  • Connect your Samsung device to the computer and let windows complete drivers installation.
  • Open Odin v3.
  • Now, Add the firmware file in Odin using AP / PDA button.
  • Make sure re-partition is NOT ticked before starting flash.
  • Click on the start button and let Odin complete flashing process it will take few minutes few minutes.

Samsung Galaxy S4 SHC-i545 Lollipop 5.0.1 Firmware: I545VRUGOC1_I545VZWGOC1_VZW

Samsung Galaxy S4 i9505 Lollipop 5.0.1 Firmware: I9505XXUHPF3_I9505OJVHPF1

Samsung Galaxy S4 i9500 Lollipop 5.0.1 Firmware: I9500XXUHOH6_I9500OJVHOG3_PAK

How to upgrade Samsung Galaxy S4 To Lollipop [ VIDEO ]

 

How to upgrade Samsung Galaxy S4 To Lollipop [ Odin3 Screenshot ]

Samsung i545 upgrade to lollipop done

Samsung i545 upgrade log:

 

<ID:0/007> Added!!
 <OSM> Enter CS for MD5..
 <OSM> Check MD5.. Do not unplug the cable..
 <OSM> Please wait..
 <OSM> Checking MD5 finished Sucessfully..
 <OSM> Leave CS..
 <ID:0/007> Removed!!
 <ID:0/007> Added!!
 <OSM> Enter CS for MD5..
 <OSM> Check MD5.. Do not unplug the cable..
 <OSM> Please wait..
 <OSM> Checking MD5 finished Sucessfully..
 <OSM> Leave CS..
 <ID:0/007> Odin engine v(ID:3.1203)..
 <ID:0/007> File analysis..
 <ID:0/007> SetupConnection..
 <ID:0/007> Initialzation..
 <ID:0/007> Get PIT for mapping..
 <ID:0/007> Firmware update start..
 <ID:0/007> SingleDownload.
 <ID:0/007> aboot.mbn
 <ID:0/007> sbl1.mbn
 <ID:0/007> sbl2.mbn
 <ID:0/007> sbl3.mbn
 <ID:0/007> rpm.mbn
 <ID:0/007> tz.mbn
 <ID:0/007> boot.img
 <ID:0/007> recovery.img
 <ID:0/007> system.img.ext4
 <ID:0/007> cache.img.ext4
 <ID:0/007> hidden.img.ext4
 <ID:0/007> modem.bin
 <ID:0/007> NON-HLOS.bin
 <ID:0/007> RQT_CLOSE !!
 <ID:0/007> RES OK !!
 <ID:0/007> Remain Port ....  0
 <OSM> All threads completed. (succeed 1 / failed 0)
 <ID:0/007> Removed!!
 <ID:0/007> Added!!
 <ID:0/007> Removed!!
 <ID:0/011> Added!!

Leave a Comment