How to Flash
Step 1: Download and extract firmware on your computer.
Step 2: Download and Extract Odin v3 or any new version.
Step 3: Open Odin v3.
Step 4: Now, restart your Phone in Download Mode (by pressing Home + Power + Volume Down buttons together).
Step 5: Now, Connect your Samsung device to the computer and wait until you get a blue sign in Odin.
Step 6: Now, Add the firmware file in Odin using AP / PDA button.
Step 7: Now, Make sure re-partition is NOT ticked before starting the flashing process.
Step 8: Finally, Click on the start button, sit back and wait few minutes to get the flashing process completed.
Flashing Log
<ID:0/104> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/104> Odin engine v(ID:3.1100)..
<ID:0/104> File analysis..
<ID:0/104> SetupConnection..
<ID:0/104> Initialzation..
<ID:0/104> Get PIT for mapping..
<ID:0/104> Firmware update start..
<ID:0/104> SingleDownload.
<ID:0/104> sboot.bin
<ID:0/104> NAND Write Start!!
<ID:0/104> boot.img
<ID:0/104> recovery.img
<ID:0/104> system.img
<ID:0/104> modem.bin
<ID:0/104> cache.img
<ID:0/104> hidden.img
<ID:0/104> RQT_CLOSE !!
<ID:0/104> RES OK !!
<ID:0/104> Removed!!
<ID:0/104> Remain Port …. 0
<OSM> All threads completed. (succeed 1 / failed 0)
