Category: Other flash files
How to Flash QMobile i7i
How to Flash QMobile i7i spd sc77xx with infinity cm2. In this tutorial i have shared full information how to flash qmobile i7i spd android phone with infinity cm2. So if you have infinity cm2 dongle then well and good. If you have not cm2 dongle you can also flash this phone via official spd flash tool. I will try to add full video of flashing spd phone with SPD_Upgrade_Tool_R4.0.0001 . So let’s start how to flash QMobile i7i with infinity cm2 spd module?
How to flash QMobile i7i with infinity cm2?
You must have original micro usb cable installed spd usb drivers and Infinity cm2 latest SPD module before continue this process.
Download QMobile i7i firmware
Extract firmware using any unzip utility .
Open Infinity CM2SPD module and select SP[SC7730..SC7731] eMMC[Android 5.x] as boot and tick Alternative LDR Mode.
Go to service tab and click on read info, connect phone by pressing vol+ and vol- keys.
If read info ok then go to Flash tab
Select QMobile i7i firmware .pac file and hit Flash.
Connect phone by pressing vol+ and vol- key to micro usb cable .
Flashing will be started and will be finished in few minutes. In my case phone taken 2 minutes and 37 seconds.
QMobile i7i flashing screenshots:
QMobile i7i Specifications as per Q Mobile website:
QMobile i7i Flashing Log:
Loading : QMobile_i7i_MP_31_10.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : QMobile_i7i_MP_29_10
FastCheck : 0x004CE01FF1
Loading files ...
File : fdl1.bin
File : fdl2.bin
File : nvitem.bin
File : nvitem_wcn.bin
File : u-boot-spl-16k.bin
File : SC7702_sc7731g_band128.bin
File : DSP_DM_G2.bin
File : SC8800G_x30g_wcn_dts_modem.bin
File : boot.img
File : recovery.img
File : system.img
File : userdata.img
File : LOGO.bmp
File : charge.bmp
File : prodnv.img
File : cache.img
File : u-boot.bin
File : SC7731_UMS.xml
Load Ok!
Operation : Flash [ v1.22 ]
======= Flash
Files set for flashing :
[ MCU ] : QMobile_i7i_MP_31_10.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : QMobile_i7i_MP_29_10
File : fdl1.bin
File : fdl2.bin
File : nvitem.bin
File : nvitem_wcn.bin
File : u-boot-spl-16k.bin
File : SC7702_sc7731g_band128.bin
File : DSP_DM_G2.bin
File : SC8800G_x30g_wcn_dts_modem.bin
File : boot.img
File : recovery.img
File : system.img
File : userdata.img
File : LOGO.bmp
File : charge.bmp
File : prodnv.img
File : cache.img
File : u-boot.bin
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
==== Wait for phone...
Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
PMTManager : Load 0x17 records
PMTManager : PMT Update Ok!
Flashing now
[FlashProc] : ERASE
Current ID : ERASEUBOOT
Current Part : uboot
[FlashProc] : Ok!
[FlashProc] : BOOTCODE
Current ID : SPLLOADER
Current File : u-boot-spl-16k.bin
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : MODEM_W
Current File : SC7702_sc7731g_band128.bin
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : DSP_W
Current File : DSP_DM_G2.bin
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : MODEM_WCN
Current File : SC8800G_x30g_wcn_dts_modem.bin
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : BOOT
Current File : boot.img
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : RECOVERY
Current File : recovery.img
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : IMAGE
Current ID : SYSTEM
Current File : system.img
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : IMAGE
Current ID : USERDATA
Current File : userdata.img
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : BOOTLOGO
Current File : LOGO.bmp
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : FASTBOOT_LOGO
Current File : charge.bmp
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : ERASE
Current ID : FLASH
Current Part : wruntimenv1
[FlashProc] : Ok!
[FlashProc] : ERASE
Current ID : FLASH_WCN
Current Part : wcnruntimenv1
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : PRODNV
Current File : prodnv.img
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : IMAGE
Current ID : CACHE
Current File : cache.img
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : ERASE
Current ID : ERASEMISC
Current Part : misc
[FlashProc] : Ok!
[FlashProc] : BOOTCODE
Current ID : UBOOTLOADER
Current File : u-boot.bin
Flashing now ...
[FlashProc] : Ok!
Elapsed: 00:02:37
Reconnect Power/Cable!
November 16, 2016 Tags: How to Flash Q-Mobile i7i SPD SC77xx With Infinity CM2SPD , How to Flash QMobile i7i , how to flash qmobile spd android , i7i flash , q mobile i7i spd 77xx flash file , qmobile android i7i software upgrade , qmobile cm2 flash file , qmobile i7i cm2 firmware , qmobile i7i firmware , qmobile i7i flash download free , qmobile i7i flash file , qmobile i7i ok flash file , qmobile i7i restart solution , qmobile i7i spd firmware file cm2
Hello friends today i am going to share most wanted firmware HOTWAV VENUS X6 Flash File. with you free. This firmware file read by infinity cm2 mtk module. So no risk of any damage. for better result use cm2 to flash this firmware. because infinity cm2 also check hardware compatibility before flash firmware file to phone. Infinity CM2 it the best ever Chinese tool read and write MTK and SPD phones.
HOTWAV VENUS X6 Flash File Free Download With MTK USB Drivers: MT6572_HOTWAV_Venus_X6_d958_4.4.2_ALPS.KK1.MP6.V1_[pakfones.com]
Please don’t forget to Subscribe via email to get notified on new posts.
HOTWAV VENUS X6 Flash File Reading Screenshots:
Please Note: We are sharing most tested firmware files here. But in chinese mobile phone this is much difficult to provide correct firmware sometime same model available in market in so many variant.
October 20, 2016 Tags: cm2 , HOTWAV , HOTWAV VENUS X6 , HOTWAV VENUS X6 firmware , HOTWAV VENUS X6 Flash File Free , VENUS , X6
Wiko iggy factory firmware download free fastest link. just start downloading with fire fox then copy link and past to idm url option enjoy!.
Firmware File Name: WIKO_IGGY_V24_EXE
Download : WIKO_IGGY_V24_EXE_[pakfones.com]
Just download zip and extract it with 7zip winrar or any other unzip utility. double click on WIKO_IGGY_V24_EXE and follow the screen instructions.
October 18, 2016 Tags: wiko iggy , wiko iggy firmware , wiko iggy flash file
XTOUCH A2 LTE official firmware read by infinity cm2 can be download for free no zip password. onedrive link with multi link support just start downloading with fire fox then copy link location and paste in idm url get highest speed downloading. contact via quick contacts or contact-us method if have any problem.
XTOUCH A2 LTE Firmware Download:
MT6735__XTOUCH__A2_LTE__hct6735m_35gu_l1__5.1__A2_LTE-8G-Android5.1-TecSync-20151218-V1
October 18, 2016 Tags: xtouch , xtouch a2 lte , xtouch a2 lte firmware , xtouch flash file
Reading Log with Infinity CM2
Chinese Miracle II [MTK module] v 1.53
Operation : Read Flash [ v1.53 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 8 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100513832334D42000EC84E0523BD
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM328
[eMMC] : FLASH_CID : 150100513832334D42000EC84E0523BD
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID : 0x4B87B768BA00D9B0A9E776E483C51251
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now ...
xGPT : Normalize settings Ok!
Brand : VGOTEL
ProdName : Venture V8
ProdModel : Venture V8
Device : Venture V8
AndroidVer: 5.1
MTKxCPU : MT6580
MTKxPRJ : ALPS.L1.MP6.V2_KEYTAK6580.WEG.L_P22
[Read Ok] : preloader_keytak6580_weg_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6580 / V1.1.2 / keytak6580_weg_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2011 MiB
Scatter saved to : F:\Flash files\VGO TEL\
MT6580__VGOTEL__Venture_V8__Venture_V8__5.1__ALPS.L1.MP6.V2_KEYTAK6580.WEG.L_P22
All done!
Done!
Elapsed: 00:08:36
Reconnect Power/Cable!
October 17, 2016
iNew u1 MT6572 factory firmware read by infinity cm2 mtk screenshots and reading log included in iNew U1 firmware file.rar. file.name MT6572__CXQ__U1__CXQ__4.4.2__INEW_U1_2.0.6_[pakfones.com] google drive link can be found below.
iNew U1 firmware file : MT6572__CXQ__U1__CXQ__4.4.2__INEW_U1_2.0.6
Infinity cm2 reading log:
[ Log text file can be found in rar file]
iNew U1 Phone Features:
OS: Android 4.4
CPU: MTK6572m 1.0GHZ Dual-Core
GPU: Mali-400MP
RAM 512M
Storage 4GB
Extend Card Support TF card up to 32GB extended
Sim Card: Dual SIM Card Dual Standby
Service Provide: Unlocked
Brand:
2G: GSM 850/900/1800/1900MHz
3G: WCDMA 900/2100MHz
MS mode: WCDMA/GSM
Shell Material Plastic
Screen: Capacitive Touchscreen, 854*480 TN pixels (233PPI)
Size: 4.0 inch WVGA Screen
Daul Camera: Front 0.3 mega pixels, rear 2.0 Back Camera
October 16, 2016 Tags: inew u1 , iNew U1 firmware file , iNew U1 flash file , mt6572 , MT6572__CXQ__U1__CXQ__4.4.2__INEW_U1_2.0.6
To flash the phone you must have Furious Gold Pack 6 activated dongle or box. So follow screenshot below to flash alcatel 4024w mtk based phone. i have lost screenshot with successfully flashed phone. if i get this again i will try to update this post with log and screenshot. i get this firmware very hardly because i have not activated furious gold support. so i have shared for other people.
Firmware : 7024W-2[X=B]B5US1.osp
How to flash Alcatel 7024W with Furious Gold Video?
VIDEO
Note: This firmware can be flashed with Furious Gold Pack 6 activated devices. Please Subscribe via email to get new posts notifications.
October 16, 2016 Tags: 7024w , 7024W-2[X=B]B5US1.osp , aclatel 7024w
Econnect_Veritab__4.4.2__HM71.V32 ] then you are at right place. pakfones.com have added MT6582__Econnect_Veritab__Econnect_Veritab__Econnect_Veritab__4.4.2__HM71.V32_www.pakfones.com.rar for you and free with all information and Sp Flash Tool download link.
October 12, 2016
Intex Aqua Life II Firmware download free with flash tool can be found in this post. This phone have Spreadtrum 7731 CPU in side so if you are using infinity cm2 or miracle box then you must select boot that is SPD 7731.Download this have all package in side.
Intex Aqua Life II Firmware package:
I will try to add how to flash spd phones using SPD Upgrade tool video and instructions, but sorry i have not time to do it this time. May be in future soon.
September 22, 2016 Tags: Intex Aqua Life 2 firmware file , Intex Aqua Life 2 flash file , Intex Aqua Life II Firmware , Intex Aqua Life II Firmware download free with flash tool , Intex Aqua Life II flash file
How to flash Wiko iggy with exe firmware?
Hi if you are in search of Zong bio-metric verification tablet firmware [