ZTE Blade L5 Network Unlock Free

Various

ZTE Blade L5 Network Unlock Free with infinity cm2 dongle. This phone is based on mt6572 cpu. and can be unlocked with infinity cm2 easily. i just tested on infinity cm2 as you will see all log and screenshots in this post below but you can use other tools also to unlock ZTE Blade L5 MT6572. Please make sure you have taken full flash and NV backup before continue unlock process. I have first backup NV file then done unlock. But you should read firmware first because in some cases phone may be bricked.

 

ZTE Blade L5 Read Info Screenshot:

screenshot-156

ZTE Blade L5 Read Info:

Operation : Check / Read Info [ v1.56 ]

1. Power Off Phone , Remove battery , Insert back
 2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
 Phone found! [ 19 ]
 Sync...
 Inital Boot Ok!
 BB_CPU_PID : 6572
 BB_CPU_NME : [MediaTek] MT6572_S00
 BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
 Processing BROM stage
 Settings for BROM configured!
 SecCfgVal : 0x00000000
 BromVer : 0x00FF
 BLVersion : 0x0001
 PreLoader : Active [ Boot with PL ]
 BootLdrSS : NORMAL with PRELOADER
 Processing DA stage
 DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
 Sending and initialize DA ...
 Running DA ver.4.2 on BBID : 0x88
 NAND Flash : NOT INSTALLED
 eMMC Flash : 150100464E31324D42068300CE21531F
 Initialize Memory ...
 DRAM already initialized by Preloader
 DAgent sent , init HW now
 eMMC FlashIC initialized
 [eMMC] : FLASH_VEN : 0x15 , OEM : 0100
 [eMMC] : FLASH_INF : [SAMSUNG] , BM21N
 [eMMC] : FLASH_CID : 150100464E31324D42068300CE21531F
 [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
 [eMMC] : FLASH_LEN : 0x00000001D2000000
 [eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
 DEV RID : 0x4B87B7681A8740F44E376AEC9A60561D
 INT RAM : 0x00020000
 EXT RAM : 0x40000000 [1 GiB]
 BOOT TYPE : EMMC_FLASH_BOOT
 SOC VERIFY : C1
 Boot Ok!

[AP] : Initial info read Ok!

Brand : ZTE
 ProdName : P172A40_AU_TLS
 ProdModel : ZTE Blade L5
 Device : P172A40
 AndroidVer: 5.1
 MTKxCPU : MT6572
 MTKxPRJ : ALPS.L1.MP6.V2.8_TECHAIN6572.WET.L_P34

Done!

ZTE Blade L5 Read NV Screenshot:
screenshot-157

ZTE Blade L5 Read NV

Operation : Read NVRAM [ v1.56 ]

1. Power Off Phone , Remove battery , Insert back
 2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
 Phone found! [ 19 ]
 Sync...
 Inital Boot Ok!
 BB_CPU_PID : 6572
 BB_CPU_NME : [MediaTek] MT6572_S00
 BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
 Processing BROM stage
 Settings for BROM configured!
 SecCfgVal : 0x00000000
 BromVer : 0x00FF
 BLVersion : 0x0001
 PreLoader : Active [ Boot with PL ]
 BootLdrSS : NORMAL with PRELOADER
 Processing DA stage
 DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
 Sending and initialize DA ...
 Running DA ver.4.2 on BBID : 0x88
 NAND Flash : NOT INSTALLED
 eMMC Flash : 150100464E31324D42068300CE21531F
 Initialize Memory ...
 DRAM already initialized by Preloader
 DAgent sent , init HW now
 eMMC FlashIC initialized
 [eMMC] : FLASH_VEN : 0x15 , OEM : 0100
 [eMMC] : FLASH_INF : [SAMSUNG] , BM21N
 [eMMC] : FLASH_CID : 150100464E31324D42068300CE21531F
 [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
 [eMMC] : FLASH_LEN : 0x00000001D2000000
 [eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
 DEV RID : 0x4B87B7681A8740F44E376AEC9A60561D
 INT RAM : 0x00020000
 EXT RAM : 0x40000000 [1 GiB]
 BOOT TYPE : EMMC_FLASH_BOOT
 SOC VERIFY : C1
 Boot Ok!

[Info] : BaseBand : MT6572_S00_MOLY_WR8_W1449_MD_WG_MP_V10_P2_1_wg_n

NVM Read Ok, MT6572_S00_MOLY_WR8_W1449_MD_WG_MP_V10_P2_1_wg_n_eMMC.spnv

Done!
 Elapsed: 00:00:22
 Reconnect Power/Cable!

ZTE Blade L5 Unlock Screeshot:

zte-blade-l5-unlock

ZTE Blade L5 Unlock Log:

Operation : SP Unlock [ v1.56 ]
 Mode : Direct Unlock

1. Power Off Phone , Remove battery , Insert back
 2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
 Phone found! [ 19 ]
 Sync...
 Inital Boot Ok!
 BB_CPU_PID : 6572
 BB_CPU_NME : [MediaTek] MT6572_S00
 BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
 Processing BROM stage
 Settings for BROM configured!
 SecCfgVal : 0x00000000
 BromVer : 0x00FF
 BLVersion : 0x0001
 PreLoader : Active [ Boot with PL ]
 BootLdrSS : NORMAL with PRELOADER
 Processing DA stage
 DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
 Sending and initialize DA ...
 Running DA ver.4.2 on BBID : 0x88
 NAND Flash : NOT INSTALLED
 eMMC Flash : 150100464E31324D42068300CE21531F
 Initialize Memory ...
 DRAM already initialized by Preloader
 DAgent sent , init HW now
 eMMC FlashIC initialized
 [eMMC] : FLASH_VEN : 0x15 , OEM : 0100
 [eMMC] : FLASH_INF : [SAMSUNG] , BM21N
 [eMMC] : FLASH_CID : 150100464E31324D42068300CE21531F
 [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
 [eMMC] : FLASH_LEN : 0x00000001D2000000
 [eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
 DEV RID : 0x4B87B7681A8740F44E376AEC9A60561D
 INT RAM : 0x00020000
 EXT RAM : 0x40000000 [1 GiB]
 BOOT TYPE : EMMC_FLASH_BOOT
 SOC VERIFY : C1
 Boot Ok!
 SIM Lock Status : Locked!
 Unlocking now ...
 Unlock done!

Done!
 Elapsed: 00:00:32
 Reconnect Power/Cable!

How Read Pattern Intex Aqua Life II Without Data Loss
ZTE B816 Network Unlock Free With CM2

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

Fill out this field
Fill out this field
Please enter a valid email address.

Menu