QMobile XL20 MT6261 flash file

QMobile XL20 MT6261 Full flash file readed by Infinity CM2 from full working phone. only need to format after flash phone. this file have privacy code so must format after flash also repair original imei.

Operation : Reset UserCode [ v1.49 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( ‘*’ )

Wait for phone…
Phone found! [ 6 ] Sync…
Sync Ok, read regs…
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 74C2CEFD3441EB990C089338EEF5DB79
BROM Protocol Version : 05
Setting…
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target …
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0112 , [MXIC] MX25L3291FWJI_09
[0] : FLASH_DIE : 00C2 0020 0016 0000
[0] : FLASH_LEN : 0x00400000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000

Backup done
Read ExtData
Sorting ExtData
Sort Ok, Rebuild Ok
Restore ExtData
All done
UserCode request removed
UserCode set to default ( 0000 or 1122 )

Done!
Elapsed: 00:00:10
Reconnect Power/Cable!

Operation : Read Flash [ v1.49 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( ‘*’ )

Wait for phone…
Phone found! [ 6 ] Sync…
Sync Ok, read regs…
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 74C2CEFD3441EB990C089338EEF5DB79
BROM Protocol Version : 05
Setting…
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target …
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0112 , [MXIC] MX25L3291FWJI_09
[0] : FLASH_DIE : 00C2 0020 0016 0000
[0] : FLASH_LEN : 0x00400000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
Reading Flash Content now …

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info   : FARSIGHTED61D_11C_PCB01_gprs_MT6261_S00.QMOBILE_XL20_V07.bin
FileVersion : QMobile_XL20_V07
Saved to : J:InfinityBoxCM2MTKRead_outFARSIGHTED61D_11C_PCB01_gprs_MT6261_S00.QMOBILE_XL20_V07.bin

Done!
Elapsed: 00:00:18
Reconnect Power/Cable!

Operation : Read Flash [ v1.49 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( ‘*’ )

Wait for phone…
Phone found! [ 6 ] Sync…
Sync Ok, read regs…
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 74C2CEFD3441EB990C089338EEF5DB79
BROM Protocol Version : 05
Setting…
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target …
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0112 , [MXIC] MX25L3291FWJI_09
[0] : FLASH_DIE : 00C2 0020 0016 0000
[0] : FLASH_LEN : 0x00400000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
Reading Flash Content now …

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info   : FARSIGHTED61D_11C_PCB01_gprs_MT6261_S00.QMOBILE_XL20_V07.bin
FileVersion : QMobile_XL20_V07

[ScatCFG] : MT6261 / QMobile_XL20_V07 / NOR , SF
Firmware saved to : J:InfinityBoxCM2MTKRead_outFARSIGHTED61D_11C_PCB01_gprs_MT6261_S00

Done!
Elapsed: 00:00:15
Reconnect Power/Cable!

Operation : Format FileSystem [ v1.49 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( ‘*’ )

Wait for phone…
Phone found! [ 6 ] Sync…
Sync Ok, read regs…
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 74C2CEFD3441EB990C089338EEF5DB79
BROM Protocol Version : 05
Setting…
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target …
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0112 , [MXIC] MX25L3291FWJI_09
[0] : FLASH_DIE : 00C2 0020 0016 0000
[0] : FLASH_LEN : 0x00400000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000

Backup exists , skip
Executing FFS FORMAT now…
FAT_RANGE : 0x003BE000-0x003FDFFF , LEN : 0x00040000
DA_RET   : DA_IN_PROGRESS
DA_RET   : FORMAT_DONE

Done!
Elapsed: 00:00:09
Reconnect Power/Cable!

, ,
QMobile BOLT T360 Hang On Startup Solution
How to Software upgrade or flash Qmobile Z9

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

Fill out this field
Fill out this field
Please enter a valid email address.

Menu