ZTE B816 Network Unlock Free With CM2

Yes we can ZTE B816 Network Unlock Free With CM2. If you have infinity cm2 dongle you can unlock this model in few seconds. As you will see all screenshots about read information zte b816 or unlock zteb816 with cm2. full software log and screenshots. I recommend you to read full firmware backup before doing any step. Me and this website is not responsible for any damage do ate your own risk.

 

ZTE B816 Network Unlock Free With Infinity CM2 MTK Module Read Info Screenshot:

screenshot-216

ZTE B816 Network Unlock Free With Infinity CM2 MTK Module Read Info Full Log:

Operation : Check / Read Info [ v1.56 ]

1. Power Off Phone , Remove battery , Insert back
 2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
 Phone found! [ 19 ]
 Sync...
 Inital Boot Ok!
 BB_CPU_PID : 6572
 BB_CPU_NME : [MediaTek] MT6572_S00
 BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
 Processing BROM stage
 Settings for BROM configured!
 SecCfgVal : 0x00000000
 BromVer : 0x00FF
 BLVersion : 0x0001
 PreLoader : Active [ Boot with PL ]
 BootLdrSS : NORMAL with PRELOADER
 Processing DA stage
 DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
 Sending and initialize DA ...
 Running DA ver.4.2 on BBID : 0x88
 NAND Flash : NOT INSTALLED
 eMMC Flash : 90014A4834473261110142E5E0CC63A9
 Initialize Memory ...
 DRAM already initialized by Preloader
 DAgent sent , init HW now
 eMMC FlashIC initialized
 [eMMC] : FLASH_VEN : 0x90 , OEM : 014A
 [eMMC] : FLASH_INF : [HYNIX] , a2G4
 [eMMC] : FLASH_CID : 90014A4834473261110142E5E0CC63A9
 [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
 [eMMC] : FLASH_LEN : 0x00000000E9000000
 [eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
 DEV RID : 0x4B87B7686842E3C86A720EA762855273
 INT RAM : 0x00020000
 EXT RAM : 0x20000000 [512 MiB]
 BOOT TYPE : EMMC_FLASH_BOOT
 SOC VERIFY : C1
 Boot Ok!

[AP] : Initial info read Ok!

Brand : ZTE
 ProdName : P172R10
 ProdModel : ZTE B816
 Device : P172R10
 AndroidVer: 4.4.2
 MTKxCPU : MT6572
 MTKxPRJ : ZTE_B816_M02

Done!
 Elapsed: 00:00:09
 Reconnect Power/Cable!

 

How To Unlock ZTE B816 Free With CM2

You must have infinity cm2 dongle to unlock this model. Yes we can unlock ZTE B816 with miracle box volcano boxes also but i have not test proof because i have done only with cm2.

  • Install MTK USB drivers latest on your PC.
  • Install and open Infinity CM2 MTK module if you have not already installed.
  • Select boot in settings tab
  • Go to Security tab and press SP Unlock.
  • Connect phone to PC via micro usb cable.
  • Disconnect phone after Unlock done! shown in log window.

Please write in comments if you have any problem regarding this phone.

ZTE B816 Network Unlock Done With Infinity CM2 MTK Module Screenshot:

screenshot-215

 

ZTE B816 Network Unlock Done With Infinity CM2 MTK Module Full Log:

Operation : SP Unlock [ v1.56 ]
 Mode : Direct Unlock

1. Power Off Phone , Remove battery , Insert back
 2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
 Phone found! [ 19 ]
 Sync...
 Inital Boot Ok!
 BB_CPU_PID : 6572
 BB_CPU_NME : [MediaTek] MT6572_S00
 BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
 Processing BROM stage
 Settings for BROM configured!
 SecCfgVal : 0x00000000
 BromVer : 0x00FF
 BLVersion : 0x0001
 PreLoader : Active [ Boot with PL ]
 BootLdrSS : NORMAL with PRELOADER
 Processing DA stage
 DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
 Sending and initialize DA ...
 Running DA ver.4.2 on BBID : 0x88
 NAND Flash : NOT INSTALLED
 eMMC Flash : 90014A4834473261110142E5E0CC63A9
 Initialize Memory ...
 DRAM already initialized by Preloader
 DAgent sent , init HW now
 eMMC FlashIC initialized
 [eMMC] : FLASH_VEN : 0x90 , OEM : 014A
 [eMMC] : FLASH_INF : [HYNIX] , a2G4
 [eMMC] : FLASH_CID : 90014A4834473261110142E5E0CC63A9
 [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
 [eMMC] : FLASH_LEN : 0x00000000E9000000
 [eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
 DEV RID : 0x4B87B7686842E3C86A720EA762855273
 INT RAM : 0x00020000
 EXT RAM : 0x20000000 [512 MiB]
 BOOT TYPE : EMMC_FLASH_BOOT
 SOC VERIFY : C1
 Boot Ok!
 SIM Lock Status : Locked!
 Unlocking now ...
 Unlock done!

Done!
 Elapsed: 00:00:29
 Reconnect Power/Cable!

 

 

4 thoughts on “ZTE B816 Network Unlock Free With CM2”

Leave a Comment