How to flash Samsung SPH-L720 with z3x pro

FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check ‘Repartition’ option.
3. If you have one file firmware, then you must check ‘Use one package file’ option.
4. Check flashing options if needed (Repartition, EFS clear, Boot update).
5. Power on phone in download mode (turn off phone, press vol.down + home + power).
6. Connect phone to PC with USB cable, install drivers if needed.
7. Press ‘Flash’ button.

Operation: Flash
Selected model: SPH-L720
Software version: 26.6

File analysis… OK
Total file size: 0x9506D710 (2384 Mb)
Searching USB Flash Interface… detected COM39
Setup connection… OK
Reading PIT from phone… OK
Sending aboot.mbn… OK
Sending sbl1.mbn… OK
Sending sbl2.mbn… OK
Sending sbl3.mbn… OK
Sending rpm.mbn… OK
Sending tz.mbn… OK
Sending boot.img… OK
Sending recovery.img… OK
Sending system.img.ext4… OK
Sending cache.img.ext4… OK
Sending hidden.img.ext4… OK
Sending modem.bin… OK
Sending NON-HLOS.bin… OK
Flashing done (time – 00:08:01)
Done with Samsung Tool PRO v.26.6

Leave a Comment