How To Flash Samsung Galaxy S4 duos i9502

Samsung i9502 flashing done using z3x, We can also flash this phone using odin3. So you don’t worry if you have not z3x box. You can download Odin3 and can flash with odin. For instruction how to flash Samsung Phones with odin.

SAMUSNG i9502 FLASH INSTRUCTIONS:

  1. Choose correct flash file(s).
  2. If you have PIT file chosen, then you must check ‘Repartition’ option.
  3. Check flashing options if needed (Repartition, EFS clear, Boot update).
  4. Power on phone in download mode (turn off phone, press vol.down + home + power).
  5. Connect phone to PC with USB cable, install drivers if needed.
  6. Press ‘Flash’ button.

SAMUSNG i9502 FLASHING LOG:

Operation: Flash
Selected model: GT-I9502
Software version: 24.9

File analysis… OK
Total file size: 0x8E4141C0 (2276 Mb)
Searching USB Flash Interface… detected COM30
Setup connection… OK
Reading PIT from phone… OK
Sending sboot.bin… OK
Sending boot.img… OK
Sending recovery.img… OK
Sending system.img… OK
Sending cache.img… OK
Sending hidden.img… OK
Sending modem.bin… OK
Sending esc_modem.bin… OK
Flashing done (time – 00:08:12)

Done with Samsung Tool PRO v.24.9

i9502 Pit file
i9502_5.0.1 firmware

If you face any problem during flash this phone use two tricks may these will help you.

  1. Tick repartitions and select pit file. 
  2. if pit not help you then you can try by renaming file to I9502ZNUIOH2_I9502CHUIOH2_5.0.1_CHINA_HOME.tar

Note: This phone i flashed with z3x pro you can try with odin3 method is same for odin3 and z3x only GUI difference. I will not responsible for any damage use this at your own risk. 

 

2 thoughts on “How To Flash Samsung Galaxy S4 duos i9502”

Leave a Comment