How to Flash QMobile i7i

How to Flash QMobile i7i

How to Flash QMobile i7i spd sc77xx with infinity cm2. In this tutorial i have shared full information how to flash qmobile i7i spd android phone with infinity cm2. So if you have infinity cm2 dongle then well and good. If you have not cm2 dongle you can also flash this phone via official spd flash tool. I will try to add full video of flashing spd phone with SPD_Upgrade_Tool_R4.0.0001. So let’s start how to flash QMobile i7i with infinity cm2 spd module?

How to flash QMobile i7i with infinity cm2?

You must have original micro usb cable  installed spd usb drivers and Infinity cm2 latest SPD module before continue this process.

  • Download QMobile i7i firmware
  • Extract firmware using any unzip utility.
  • Open Infinity CM2SPD module and select SP[SC7730..SC7731] eMMC[Android 5.x] as boot and tick Alternative LDR Mode.
  • Go to service tab and click on read info, connect phone by pressing vol+ and vol- keys.
  • If read info ok then go to Flash tab
  • Select QMobile i7i firmware .pac file and hit Flash.
  • Connect phone by pressing vol+ and vol- key to micro usb cable.
  • Flashing will be started and will be finished in few minutes. In my case phone taken 2 minutes and 37 seconds.

 

QMobile i7i flashing screenshots:

qmobile-i7i-flash-file-pakfones-comqmobile-i7i-flash-file-pakfones-com-1

 

QMobile i7i Specifications as per Q Mobile website:

CPU 1.2GHz Quad core
Display 5″ FWVGA TN
Rear Camera 5MP
Front Camera 2 Mega Pixel Camera
SIMS Dual SIM
Battery 2500 mAh
ROM 8GB
RAM 1GB
Internet Yes
Network GSM 900/1800/1900 WCDMA 900/2100
3G Yes
Bluetooth Yes
3.5 mm Ear Jack Yes
Audio Player Yes
Video Player Yes
FM Radio Yes

 

 

QMobile i7i Flashing Log:

 

Loading    : QMobile_i7i_MP_31_10.pac
 CRVersion  : BP_R1.0.0
 PacCPUinfo : SC77xx
 PacVersion : QMobile_i7i_MP_29_10
 FastCheck  : 0x004CE01FF1

Loading files ...

File : fdl1.bin
 File : fdl2.bin
 File : nvitem.bin
 File : nvitem_wcn.bin
 File : u-boot-spl-16k.bin
 File : SC7702_sc7731g_band128.bin
 File : DSP_DM_G2.bin
 File : SC8800G_x30g_wcn_dts_modem.bin
 File : boot.img
 File : recovery.img
 File : system.img
 File : userdata.img
 File : LOGO.bmp
 File : charge.bmp
 File : prodnv.img
 File : cache.img
 File : u-boot.bin
 File : SC7731_UMS.xml

Load Ok!

Operation : Flash [ v1.22 ]

======= Flash
 Files set for flashing :
 [ MCU ] : QMobile_i7i_MP_31_10.pac
 CRVersion  : BP_R1.0.0
 PacCPUinfo : SC77xx
 PacVersion : QMobile_i7i_MP_29_10
 File : fdl1.bin
 File : fdl2.bin
 File : nvitem.bin
 File : nvitem_wcn.bin
 File : u-boot-spl-16k.bin
 File : SC7702_sc7731g_band128.bin
 File : DSP_DM_G2.bin
 File : SC8800G_x30g_wcn_dts_modem.bin
 File : boot.img
 File : recovery.img
 File : system.img
 File : userdata.img
 File : LOGO.bmp
 File : charge.bmp
 File : prodnv.img
 File : cache.img
 File : u-boot.bin

1. Remove battery. Insert battery back
 2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 3. Insert cable

====  Wait for phone...

Phone found! [ 7 ]
 Port Opened
 Sync...
 InitBoot Done [ 0x81 ] , Ver : SPRD3
 Sync...
 Sending FDL
 [Info] : If SW freeze here more, than 15 seconds - remove cable
 PickUp loaders from pac
 FDL Ready!
 Boot Ver : Spreadtrum Boot Block version 1.1
 Sending FLASH FDL
 FLASH FDL Ready!
 Boot Ok!

FlashMode Set : Ok!
 PMTManager : Load 0x17 records
 PMTManager : PMT Update Ok!
 Flashing now

[FlashProc] : ERASE
 Current ID   : ERASEUBOOT
 Current Part : uboot
 [FlashProc] : Ok!

[FlashProc] : BOOTCODE
 Current ID   : SPLLOADER
 Current File : u-boot-spl-16k.bin
 Flashing now ...
 [FlashProc] : Ok!

[FlashProc] : CODE
 Current ID : MODEM_W
 Current File : SC7702_sc7731g_band128.bin
 Flashing now ...
 [FlashProc] : Ok!

[FlashProc] : CODE
 Current ID : DSP_W
 Current File : DSP_DM_G2.bin
 Flashing now ...
 [FlashProc] : Ok!

[FlashProc] : CODE
 Current ID : MODEM_WCN
 Current File : SC8800G_x30g_wcn_dts_modem.bin
 Flashing now ...
 [FlashProc] : Ok!

[FlashProc] : CODE
 Current ID : BOOT
 Current File : boot.img
 Flashing now ...
 [FlashProc] : Ok!

[FlashProc] : CODE
 Current ID : RECOVERY
 Current File : recovery.img
 Flashing now ...
 [FlashProc] : Ok!

[FlashProc] : IMAGE
 Current ID : SYSTEM
 Current File : system.img
 Flashing now ...
 [FlashProc] : Ok!

[FlashProc] : IMAGE
 Current ID : USERDATA
 Current File : userdata.img
 Flashing now ...
 [FlashProc] : Ok!

[FlashProc] : CODE
 Current ID : BOOTLOGO
 Current File : LOGO.bmp
 Flashing now ...
 [FlashProc] : Ok!

[FlashProc] : CODE
 Current ID : FASTBOOT_LOGO
 Current File : charge.bmp
 Flashing now ...
 [FlashProc] : Ok!

[FlashProc] : ERASE
 Current ID   : FLASH
 Current Part : wruntimenv1
 [FlashProc] : Ok!

[FlashProc] : ERASE
 Current ID   : FLASH_WCN
 Current Part : wcnruntimenv1
 [FlashProc] : Ok!

[FlashProc] : CODE
 Current ID : PRODNV
 Current File : prodnv.img
 Flashing now ...
 [FlashProc] : Ok!

[FlashProc] : IMAGE
 Current ID : CACHE
 Current File : cache.img
 Flashing now ...
 [FlashProc] : Ok!

[FlashProc] : ERASE
 Current ID   : ERASEMISC
 Current Part : misc
 [FlashProc] : Ok!

[FlashProc] : BOOTCODE
 Current ID   : UBOOTLOADER
 Current File : u-boot.bin
 Flashing now ...
 [FlashProc] : Ok!

Elapsed: 00:02:37

Reconnect Power/Cable!

2 thoughts on “How to Flash QMobile i7i”

Leave a Comment