How To Flash Huawei Y330-U11

Hi, Friends I received a Huawei y330 Android mobile phone today. The customer said that this is giving an error while flashing or won’t get firmware by dload. So I checked by dload with my own firmware this phone also gives me the error “dload:update partition MBR failed” [FAIL] so I decided to flash the phone with USB method. But when I started flashing by sp flash tool it gives me an error this  “Error 5056 – BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069)” I have done flashing and decided to post here to help you. So let start how to fix it and why we get error.

Errors:

  • dload:update partition MBR failed
  • Error 5056 – BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069)

Why it comes and what is the solution?

Because internal partition and file partition info not matching. It means that the files that you are trying to flash are larger than the available space on your device partition, Ensure the files that you are trying to flash are exactly the same as your device model, or sometimes due to secured boot. So in this case i have flashed SEC_RO file inside  “Rework-Secro” folder. Then flashed full firmware.

Huawei Ascend Y330 Firmware

HUAWEI Y330-U11 Firmware (Android 4.2, EMUI 2.0, V100R001C00B110CUSTC00D001, Kenya) This link is removed from Huawei server, not removing it from here due to reference to the file name.

Huawei_Y330-U11_MT6572_V100R001C00B112_Burma_4.2.2

How to Flash Huawei MTK Mobile Phones With SP Flash Tool?

  • First download Huawei firmware and extract it using any unzip utility.
  • Install required MTK USB drivers.
  • Then open sp flash tool available in firmware package.
  • Press Scatter-loading button and go to USB_Upgrade folder then Rework-Secro folder and select MT6572_Android_scatter.txt
  • Press Download and connect powered off mobile phone to usb cable.
  • secro-sign.img flashing will be done in few seconds and Download OK message will be appear on screen with big green [O]
  • Then again press Scatter-loading button and select MT6572_Android_scatter.txt in USB_Upgrade folder.
  • Press Download button and wait let sp flash tool to test firmware files that are going to be flashed when finish file checking immediately connect powered off  mobile phone to USB cable.
  • Let Sp Flash Tool finish the job it will take few minutes.
  • Disconnect phone from USB cable after appearing of Download OK message with big green [O]
  • Power on your mobile phone and wait few minutes to complete boot process first time.
  • Then configure phone with your required setting and done!

 

Screenshots one by one:

how-to-flash-huawei-y330

how-to-flash-huawei-y330_2

how-to-flash-huawei-y330_3

how-to-flash-huawei-y330_4

 

Please don’t forget to subscribe via email if you want to get more useful post notification from this blog. Feel free to write in comments if you have any problem in your cell phone or contact us via contact form. We will try to help you to fix it as soon as we can. You can also visit our service lab or send us phone to fix it via any Currier Service.

 

2 thoughts on “How To Flash Huawei Y330-U11”

  1. hola buenas amigo, intente flashear por el metodo dload pero me sale el mismo error de la particion mrb, luego lo flasheo por el falsh tool y realiza todo el procedimiento hasta llegar al 100% pero aun asi sigue sin pasar del logo de huawei, a que crees se deba eso? de antemano gracias!

    1. Hi, Please always try to write in English because i can’t understand Spanish, i just translated. About phone try to write other firmware may be mismatched.

Leave a Comment